The more I learn, the more I realize how little I know.

Showing posts with label side release buckles. Show all posts
Showing posts with label side release buckles. Show all posts

Friday, January 2, 2009

Primary considerations when buying or making a paracord "survival" bracelet

A survival bracelet made from paracord (parachute cord) should be constructed so that it comes apart easily and gives you a sufficient length to use in your emergency.



I'll be looking at the 3 different styles you'll most likely find somewhere online: the single-strand solomon, the double-strand solomon, and the single-strand weave. ("Solomon" refers to a solomon bar which is a series of square knots. You can also look at a previous blog article I did on the solomon bar HERE. And the weave is just going over-under-over, etc. then snugging it tight.)
I made the three bracelets for my wrist, about 7 1/4" around. But don't get hung up on the numbers. And I don't want to get too technical with all this. I'm just trying to give you something to think about.

First up is the double-strand solomon, the most popular but as you'll see, is the worst of all three styles for a survival bracelet.


Is it easy to take apart? A solomon bar (a series of square knots) is easy to undo because paracord square knotting doesn't stay tight. But each of those knots will have to be undone individually. So as you're standing there freezing, sweating or in the wind or rain, you'll be fumbling through each knot. Easy, but it'll take a few minutes.

Is there a suffficient length of cord to use? For mine, I used 2 strands of paracord about 50" each. So that's 100" but it's not really 100 because if you need that longer length you'll have to tie a "bend" to join the 2 strands together and that will reduce your total length by about 3 inches for each strand. And the reliability and strenth of that connection will be dependent on the type of bend you tie. But with any knot, it will be weaker than a single strand. So you've got a weak 94" - though that may be good enough for what you need to do.

Second, is the single-strand solomon.


It's comes apart and has about the same length as the double strand but you'll get one long piece of cord. For that reason alone, it's better in a survival situation than the double-strand. If you need two lengths, you can always cut it. You're carrying a knife, aren't you? (Though with the single-strand, you can cut it where you want. With the double-strand, you're stuck with where it's already been cut.)

Third, and I think, the best bracelet for your survival or emergency situation is the single-strand weave. I used about 115" to make mine (more paracord than either solomon) and it's one strand.


But is it easy to take apart?

Taking apart the weave, is like pulling on a loose thread... The way it's put together, it's just one pull and your bracelet (with a little help) will come apart. It's so much faster and easier than the solomons, they shouldn't even be compared to each other.

So, I believe, the weave is your best bracelet for survival.

But don't be so quick to throw out your solomon bar bracelets and jump on the Weave bandwagon till you see what else I've got to say on the subject.

I'm working on a Part 2 to look at the other things you should consider before buying or making your "survival" bracelet. Like should you get one with a buckle or a shackle?



Seems obvious? Don't be so sure.

For now though, you can check out Stormdrane's tutorial on making the weave bracelet HERE. It's what I used to make mine. I'm not really sure anyone sells a "weave" bracelet, most are the square-knotted type - Google "paracord bracelet" to find those.

And if you need to tie your two strands of paracord together, use a "bend" that won't come apart in a couple shakes (like the sheet bend). Try the far-superior Zeppelin Bend HERE.

(This was adapted from a post I made on the Every Day Carry Forums.)


Nitro-Pak Emergency Preparedness Center

Mountain House Freeze-Dried Food

Saturday, December 20, 2008

Three bracelets

I got my side release buckles in the mail the other day and made some bracelets as experiments for a possible future watchband. The two on top are done with square knotting and for the bottom one I used the instruction from Stormdrane found here.




The small buckle is the 3/8" Curved Side Release, the larger one is the 5/8" Curved Side Release from Creative Designworks (I recommend - good prices and my buckles arrived a couple days sooner than I expected).

since 12/17/08